메시지를 남겨주세요
곧 다시 연락 드리겠습니다!
귀하의 메시지는 20-3,000 자 사이 여야합니다!
이메일을 확인하십시오!
정보가 많을수록 커뮤니케이션이 향상됩니다.
성공적으로 제출되었습니다!
곧 다시 연락 드리겠습니다!
메시지를 남겨주세요
곧 다시 연락 드리겠습니다!
귀하의 메시지는 20-3,000 자 사이 여야합니다!
이메일을 확인하십시오!
용법: | 가죽 구부리기 시험 | 보증: | 12개월 |
---|---|---|---|
상품 이름: | 지긋지긋하게 테스터를 구부리기 | 애플리케이션: | 가죽 & ; 신발류 |
전원 공급기: | AC220V | 품질: | 높고 좋습니다 |
디스플레이: | LCD | ||
하이 라이트: | 22.5 Degree Bally Leather Flexing Tester,100 Cycles Bally Leather Flexing Tester,22.5 Degree Footwear Testing Machine |
Bally Leather Flexing Tester GT-KC10A
Application: This Bally resistance flexing tester is used to determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
|
The test specimen is folded in half then one end is secured in a clamp. The test specimen is then turned inside out and the free end secured in a second clamp at 90 degrees to the first. The first clamp is repeatedly oscillated through a fixed angle at a defined rate causing the test specimen to flex. At set intervals the number of flexing cycles is recorded and the damage to the test specimen is visually assessed. The test can be carried out with wet or dry test specimens at ambient.
Model |
GT-KC10A-6 |
GT-KC10A-12 |
GT-KC10A-24 |
Test position |
6Sets |
12 Sets |
24 Sets |
Type of upper grips |
Please choose the suitable type as below chart of ‘Standard’. |
||
Flexing angle |
22.5° ± 0.5° |
||
Flexing speed |
100 ± 5 cycles / flexes per minute |
||
Counter |
LCD 0 - 999,999.(adjustable) |
||
Sample size |
70 ± 5 x 45 ± 5 mm |
||
Power supply |
1∮AC 220V 50/60HZ |
||
Dimensions ( L x W x H ) |
700x300x340mm |
780x450x360mm |
1100x510x220mm |
Weight |
About 45kg |
60kg |
70kg |
Standards:
SATRA TM 55; IULTCS/IUP 20-1; ISO 17694 ; EN 13512 ; EN344-1 section 5.13.1.3 and annex C; EN ISO 20344 section 6.6.2.8; GB/T20991 section 6.6.2.8; AS/NZS 2210.2 section 6.6.2.8; JIS-K6545; BS 3144 Clause 13 |
Equipped with A type of upper grips. |
ISO 32100 ; DIN53351; ISO5402-1; GE-24;ASTM D 6182 |
Equipped with B type of upper grips. |
Accessories:
Standards Accessories |
Power line |
1pc |
Optional Accessories |
GT-KD20 Pneumatic sample cutting machine |
(Cutter: 70 ± 5 x 45 ± 5 mm) |