Gester International Co., Ltd
| 원래 장소: | 중국 |
|---|---|
| 브랜드 이름: | GESTER |
| 인증: | CE, ISO |
| 모델 번호: | GT-M82 |
| 최소 주문 수량: | 1개 세트 |
| 포장 세부 사항: | 나무로 되는 포장 |
| 배달 시간: | 10-30 일 |
| 지불 조건: | L/C (신용장), 인수 인도, D/P (지급도 조건), 전신환, 웨스턴 유니온, 머니그램 |
| 공급 능력: | 200개 세트 / 달 |
| 용법: | 장비를 시험하는 완구 | 보증: | 1년이요 |
|---|---|---|---|
| 상품 이름: | 완구 스쿠터 강도 시험기 | 애플리케이션: | 완구와 완구 재료 |
| 전원 공급기: | 220V 50Hz | 기술: | 직업 |
| 게스터: | SGS 감사된 공급자, TUV | ||
| 하이 라이트: | 장비를 시험하는 EN 71-1 완구,170 킬로그램 장난감 시험 장비,EN 71-1 스쿠터 안내는 강도 시험기를 관을 답니다 |
||
|
Application: Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. Standards: EN 71-1; ISO 8124-1 |
1.Resistance to downward forces
Place the toy scooter on a horizontal plane and secure it so that it will stand upright during the test.Check that the locking devices are correctly engaged.
A) For toy scooters with two handles, suspend a mass of (50+/-0.5)kg at the centre of each handle. (see Figure 1 a) Maintain the load for 5 min. Determine whether the steering tube collapses and the locking devices are still operable and engaged. Remove the 50kg masses. Release the main locking devices and with the secondary locking device still engaged, load the handles with a mass of (25+/-0.2)kg each and maintain the load for 5 min. Determine whether the secondary locking device is still operable and engaged.
B) For toy scooters with steering tubes without handles, perform the test using a load with a mass of (100+/-1)kg and (50+/-0.5)kg respectively on top of the tube.(see Figure 1 b)
2.Resistance to upward forces
Place and secure the toy scooter upside down on a podium(see Figure 3 c). Check that the locking devices are correctly engaged.
A)For toy scooters with two handles, suspend a mass of (25+/-0.2)kg at the centre of each handle. Maintain the load for 5 min.
B) For toy scooters with steering tubes without handles ,place a mass of (50+/-0.5)kg on the end of the steering tube. Maintain the load for 5 min. Determine whether the steering tube has separated and the locking devices are still operable and engaged.
|
Model |
GT-M82 |
|
Loading method |
Cylinder loading |
|
Control mode |
Touching screen control |
|
Test load |
(25±0.2)kg (50±0.5)kg (100±1)kg |
|
Dimension |
1200×1000×1700mm |
|
Weight |
170kg |
|
Standards |
ISO 8124-1 section 5.29 |
|
Optional accessories |
GT-MA12 Air compressor |
